Metal lathe radius turning tool frame 2" PRE-BROACHED - NOT A FINISHED TOOL!

Description

"A-LEE-SAM"
RT-2b
Full 2 INCH BALL, PRE-BROACHED FOR 1/4 " SQUARE TOOLBITS!
NOT A FINISHED TOOL!
over 1,000 sold!
.99 with FREE SHIPPING***
***DOMESTIC USA ONLY***
This completely cut out frame assembly is made out of 1/2 inch, high strength
ALUMINUM alloy. We decided to go with aluminum, (as are some of the completed models sold by various companies for big bucks), for several reasons. First, it is much easier for the home shop machinist to machine aluminum. Second, we now cut these with a waterjet machine. This produces a much nicer cut edge than laser cutting. There is no heat distortion or edge tempering. Finally, the overall appearance looks much nicer!
Please read down until the end, customer questions are answered.
"Great transaction, took me about three hours to machine and assemble. Works great"
wilsonkl
[Ebay feedback 2020]
"Worked fantastic, fast shipping , worked great!" [Ebay feedback 2016]
THIS MODEL COMES PRE-BROACHED TO FIT MOST 1/4 INCH SQUARE TOOL BITS
A small parts kit is NOW available IN OUR STORE,
(NOT INCLUDED WITH THIS AUCTION, SEE PIC #4)
, supplying everything you need to make a radius tool! In case your scrap bin doesn't have the items needed or you just don't want to spend the gas money looking for them. See our other listing, "Radius tool frame small parts kit". With FREE SHIPPING, (domestic USA ONLY). See pic #4, (not included in this auction).
"good parts, very nice drawings, quick shipping! I have finished the tool, in use"
"These are really neat! (lathe radius turning tool frame) Its a fun project too"
"excellent quality, Nice set of instructions"
"I made those 4 rings in less time than I would have spent on 1 ring, I could have made 7 rings plus given them a shine in the same time as 1 ring the old way. It is a big saving. I made very light cuts with the cutter tip and it worked perfect.
[cutting titanium & stainless steel]"
J.R., Prescott, WI
The price still saves you about 0.00 compared with buying the finished commercial tool!
SO
The hard work is done for you!  With just minimal machining this frame assembly is ready to be made into a nice, (up to 2 inch balls), radius tool for your metal lathe. Will fit any 1/2 inch tool holder for your South Bend, Monarch, Logan, Atlas, Craftsman, Hardinge, Chinese import or other metal lathes. If you have a drill press or mill with a vise, (or your lathe with a milling vise attachment) you can make one
!
Just 4 holes to drill, along with minimal machining or just filing to remove slight taper at mating surfaces, (mating surface of inner and outer frame is cut slightly oversize to allow for stock removal).  Now with radiused corners for safety, (no more skinned knuckles)!
SEE PICTURE OF A COMPLETED TOOL.
THIS AUCTION IS FOR THE FRAME ASSEMBLY ONLY!
PLEASE, THE TWO FRAME PIECES ARE DESIGNED  NOT TO FIT TOGETHER PRIOR TO MINIMAL FILING/MACHINING
, (
the 1st picture shows the two parts AFTER fitting),
SO DO NOT SEND THE ITEM BACK FOR "DOES NOT FIT TOGETHER"!
NOT A FINISHED TOOL!
Why pay up to 0.00 to own one when you can NOW make one easily in about 1 hour? This pre-cut assembly will need just a few small parts to finish,  (IF LIKE ME YOU HAVE THESE ALREADY IN YOUR SCRAP BIN OR NOW AVAILABLE FROM US IN OUR STORE). You will need:
a piece of .250/.375 drill rod about 5 inches long, (depends on how long you want your handle)
a .250 dowel pin 1.25 inches long
a .250 dowel pin 2.25,
BOTH DOWEL PINS CAN BE CUT FROM THE FIRST ITEM IF USING .250 DRILL ROD AND IF BUYING EXTRA LENGTH
(2) bronze bushings .25 ID X .3125/.375 OD X .5 long , THESE ARE OPTIONAL!  IF NOT USING REAM .251 , TO SLIP FIT DOWEL PINS IN OUTER FRAME
a length, (about 1 to 2 inches) of  1 inch brass/aluminum/steel round/hex stock to fit handle or wrench to
(1) to (4) 10-32 set screws . Exact number dependent on method of securing dowel pins to inner frame, either press fit or secured with set screws, one (or two) needed to secure toolbit and one tool handle unless press fit or can use (1) SHCS instead.
I WILL SUPPLY EASY TO UNDERSTAND PLANS TO AID IN PUTTING ONE TOGETHER WIT
H EACH PURCHASE.
Check out our other tools for the home shop machinist in our store!
Many reproductions of the South Bend Lathe Works vintage tools and accessories! Other novel tools for the home shop machinist and wood worker / turner!
If you are a high bidder on more than one of my items during the same time period, and paying by Paypal, I will invoice you once for all the items, so you may pay one time.
T
he recipient is responsible for all duties, taxes and other fees imposed by that government.
A response to the first review...
“The inner yoke for convex turning did not fit within the outer yoke. This was basically a choice by the manufacturer to not dimension the inner yoke correctly, apparently because of some uncertainty about the position of the broached hole.”
The frame is
designed
to be oversize and need trimming, (due to the slight taper caused by the waterjet cutting process),
as stated in the description and yes a choice by us but in NO way “of some uncertainty about the position of the broached hole”. There IS NO uncertainty of the position of the broached hole! It is placed exactly where it is supposed to be.
“Thus the picture of the inner yoke inside the outer only applies after the new owner has machined it to fit.”
Yes, the picture shows the two parts after fitting, it’s a kit, it needs to be finished as per the description.
“
After determining the exact position of the broached hole”
?? We already determined that. As long as you take about the same material off each of the four short, (about 2” long), mating surfaces where the water jet left a taper cut surface the broached hole remains centered and this is not critical as you will center the tip of the cutting tool to your lathe’s axis after it is on your lathe!
“There was no assembly diagram. It took a long time to figure out that the round piece was probably the concave tool bit holder.”
There are two instruction sheets, one
specifically
for the extra round convex tool cutter bar with explicit instructions.
This only applies to the RT-2BCC, concave convex model if purchased in another auction.
“That round piece also was not ready to fit.”
Correct! Again, it is NOT A FINISFED TOOL as per the description. AFTER the minimal taper is filed off the outer yoke’s mating surface, (to the inner “C” piece), you will have the dimension, or the length of, that the round convex cutting bar needs to be. As per the instructions you will need to remove equal amounts of material, (maybe .010 - .020”), off EACH end to keep the broached hole centered on the bar.
“It could have been done by the manufacturer.”
Well, yes it could have been but then again we could have finished the complete tool if we wanted too, (but we did not want too, some other fine companies offer a very nice finished radius tool and that is not our niche). It was all about offering a tool at the point of which the average home shop machinist could take over and finish it. Saving about half the cost or more of a finished tool and having some fun using their home machine shop in the process. Isn’t that is what this hobby is all about, turning chips?
I have sold over 1,000 of these and this person was only the second person to complain that this unfinished tool was apparently above their ability in about 10 years.
TimQ
Product Engineer
Alisam Engineering
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.