Brand New Digital Fluke 772 Milliamp Process Clamp Meter Tester with case

Description

Product description
The Fluke 772 milliamp process digital clamp-meter is a manual-ranging meter for measuring DC milliampere (mA) output signals of 24V loop circuits. It has a clamp that measures DC to 100mA. The clamp has two jaws that can close around an electrical conductor up to 4.5mm (0.177 inches) in diameter to measure current without touching or interrupting the circuit, and has a 1m extension cable so it can detach from the meter body for hard-to-reach applications. A set of test leads is included for measuring DC to 24mA. The meter can source and simulate 4 to 20mA signals, and is accurate to 0.2% with a resolution of 0.01mA. The meter has an LCD that shows both mA readings and percent of 4 to 20mA span, and a backlight for visibility in low light that turns off automatically after two minutes. An LED at the top of the meter body can be illuminated to aid visibility of wires in dark enclosures. The meter features a built-in 24V loop power supply for powering a transmitter and measuring its milliampere output signal. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. The unit operates on four 1.5V AA batteries, and turns off automatically after 15 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced.
The meter is manual-ranging, so the user selects the operating range for the property being measured. It meets EN (European Standards) and IEC (International Electrotechnical Commission) safety standards 61010-1 and 61010-2-032, has CE (European Conformity) marking, and complies with Canadian Standards Association (CSA) and Australia N10140. The unit comes with a soft carrying case.
Specifications
Maximum DC (direct current) input
100mA
Standards met
EN and IEC safety standards 61010-1 and 61010-2-032CE marking; CSA; Australia N10140
Power supply
(4) 1.5V AA NEDA batteries
Weight
260g/9.1oz.
Dimensions (H x W x D)
212 x 59 x 38mm/8.35 x 2.32 x 1.5 inches
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Clamp-meters, also called clamp-on meters, have two jaws that fit around a conductor to measure electrical current without cutting through wires, or touching or interrupting the electrical circuit. Available in handheld or benchtop models, clamp-meters diagnose problems in electrical equipment, wiring, and power supplies. All clamp-meters test for current. Some come with test leads and inputs for measuring voltage, capacitance, and resistance. They display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.
What's in the Box?
Fluke 772 milliamp process digital clamp-meter
Test lead set
Mini-hook test lead set
Alligator clip set
Hanging tool with hook and loop strap
(4) AA batteries
Soft carrying case
Notice:
The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support!
Shipping:
We will ship all items within 1-3 working days upon receipt of payment,our goal is: ship it as fast as we can.
Standard Shipping: To USA,UK and Australia by ePacket,need 7-14 working days.
Expedited/Standard Int'l Shipping by Fedex,DHL,TNT and EMS courier: To USA,need 3-6 business days,To other countries,need 4-8 business days normally.But sometimes int'l delivery is highly depended on the courier company and local customs/duties.
Import duties and taxes are not included in the item price or shipping charges.These charges are the buyer responsibility.
Warranty&Reture Policy:
We encourage all customers to communicate with us through eBay messages. If you have any questions or comments whatsoever regarding our products or listing, we are waiting to hear from you
A 1 year warranty is offered for this product.If the product malfunctioned under proper usage per instructions
manual within the warranty period, please contact us to obtain shipping instructions and send it back at your shipping costs.
30 days evaluation and investigation takes placed after receiving your return item.A brand new replacement unit will be sent to you at our shipping costs if it meets our warranty requirements.