Blue Point MT586AK Multi-Mate Kit W/ Leads EETA501A Clamp made by snap on MT586

Description

For sale is a very nice Blue Point MT586a Multi-Mate Electrical Multimeter kit and more!  Kit comes with box, leads, spark plug wire inductive pickup & instruction manual.   Also includes eeta501a clamp!  Everything including the unit is in very good condition & operates as it should.  Case has a broken tab, so the cover separates, but case closes up fine.
The Blue Point paperwork in the box lists the Snap-On business address, and blue point is a subsidiary of snap on tools.  Very high quality kit!
Info from the web:
Features:
• LCD Display - 20000 count with 42 segment bar graph.
• REC (Record Mode) - Store minimum, maximum, and average readings over a measurement period.
• RANGE - Manually select the appropriate range.
• AC/DC - Manually select AC or DC measurement function.
• FUNCTION - Toggle between functions on Ohm, TEMP, and IG modes.
• Hz (Frequency) - Measure the frequency of sensors and signals.
• OHMS/RESISTANCE - Measure the resistance of spark plug wires, coils, sensors, and continuity of wiring.
• High Resolution DCmV Range - Additional 40 millivolt range with 0.01mV resolution for improved accuracy when performing low voltage measurements.
• DCV, ACV (DC Volts, AC Volts) - Measure the voltage of circuits and sensors. Measure the voltage of ABS wheel sensors.
• REL (Relative Mode) - Factor out lead resistance for improved low ohm measurements or compare readings to a known standard. Can also be used for differential measurements.
• CYL (Cylinder) - Selects the number of cylinders in IG mode.
• HOLD - Lock the reading on the display for hard to read locations for future reference.
• PEAK-H (Peak Hold) - Capture signals spikes as fast as 1mS to diagnose intermittent events.
• TEMP (Temperature) - Measure temperature with included temperature probe.
• AC/DC Current Functions - Measure the parasitic draw from the battery with ignition off.
• IP, IG (Automotive Functions) - Measure RPM, Duty, Dwell, mS pulse width, Frequency.
• TILT STAND - Is built-in into the instrument housing.
• SEPARATE FUSE/BATTERY COMPARTMENT - Is easily removed for battery/fuse replacement. Fuses are labeled with replacement number.
General Specifications
Max. Voltage between any Input and Ground: 1000V
Fuse Protection mA: 0.5Amp/600VAC
Fuse Protection: A: 10Amp/600VAC
Display Type Digital: 20,000 count, 4x per second update
Display Type Analog: 2 x 41 segments, 20x per second update
Operating Temperature: 0° to 40°C (32° to 104°F)
Storage Temperature: -10° to 50°C (14° to 122°F)
Relative Humidity (0% to 80%): 0° to 35°C (32° to 95°F)
Relative Humidity (0% to 70%): 35° to 55°C (95° to 131°F)
Temperature Coefficient: 0.1 x (Specified Accuracy) per °C for temperature <18°C to>28°C
Power Supply: (1) each 9 volt alkaline battery (pre-installed)
Battery Life: 100 hrs. Typical
Size (H x L x W): 2.4" x 3.8" x 8.0" (61mm x 97mm x 203mm)
Weight: 24 oz. (680g)